Target Assembly Manual
Target Frame Parts List
|1. Left Top Corner Tube (1x)||10. Right Back Bottom Corner Tube (1x)|
|2. Right Top Corner Tube (1x)||11. Hinges (2x)|
|3. Top Middle Tubes (2x)||12. Bolts with Wing nuts (2 sets)|
|4. Left Front Bottom Middle Tube (1x)||13. Net (1x)|
|5. Right Front Bottom Middle Tube (1x)||14. Bungees (24x)|
|6. Left Front Bottom Corner Tube (1x)||15. Ground Stakes (4x)|
|7. Right Front Bottom Corner Tube (1x)||16. Locking Pins (2x)|
|8. Bottom Back Middle Tube (2x)||17. Target Board (1x)|
|9. Left Back Bottom Corner Tube (1x)|
Please remove all components from the packaging and confirm all parts are included.
Please reference the frame assembly diagram of Figure 1.
Attach all the tubes together to assemble the frame as pictured in the assembly drawing.
TO ATTACH THE NET
Spread the net out and find the red tabs. Red tabs indicate the corners. Attach the bungee cords (Figure 3) starting from one corner (Figure 4). Follow by attaching the remaining three corners. Attach three bungee cords across the top bar spreading them evenly. Repeat on the bottom.
TO ATTACH THE TARGET
Lay the target out flat and locate the grommet holes. Starting from the top, attach a bungee through each grommet hole and attach to the frame (Figure 5).
Use ground stakes for extra stability when needed.