7x7 Back Catch Net
7'X7' BACK CATCH NET PARTS
|A. Base Legs (2)||E. Upper Pole (2)|
|B. Middle Base Pole (1)||F. Ground Peg (4)|
|C. Middle Base Pole (1)||G. Net (1)|
|D. Lower Pole (2)||H. Carry Bag (1)|
Join the corresponding pipes securely together. Start with the base parts, A, B, C and attach part D last.
Thread one sleeve of the net over the lower poles (D). Make sure the velcro straps are on the bottom. Repeat on the other side. You may need to bend the poles closer together.
Place each of the upper poles (E) into the top of the lower poles (D). Check that the poles are seated correctly.
Hold the upper poles and pull the sleeve of the net up until you are able to loop the white string around the notch at the top. You will be required to bend the poles inwards. Secure the bottom by looping the black string around the hook. Repeat on the other side.
Finally secure the Velcro flaps on the bottom of the net around the middle base poles.
Caution: Do not stand in front of the pole when bending. The pole may spring back and cause injury. The help of a second person is recommended.
Warning: Use adult supervision and follow instructions when using and setting up the net. Frequent use and/or abuse will eventually strain the net and can cause breakage.