12x9 Back Catch Net

12'X9' CATCH NET PARTS

A. Base Legs (2) E. Upper Pole (2)
B. Middle Base Pole (1) F. Ground Peg (4)
C. Middle Base Pole (3) G. Net (1)
D. Lower Pole (2) H. Carry Bag (1)

 

STEP 1

Join the corresponding base parts A, B, and C securely together.

 

STEP 2

First, thread each of the lower poles (D) through the sleeves of the net. Make sure the velcro straps are on the bottom.

Next, insert the lower poles (D) into the base legs.

STEP 3

Place the remaining lower poles (D) and upper poles (E) into the top of the lower poles. Check that the poles are seated correctly.

STEP 4

Hold the upper poles and pull the sleeve of the net up until you are able to loop the white string around the notch at the top. You will be required to bend the poles inwards and tilt the whole frame towards you. Secure the bottom by fastening the velcro ribbons around the bottom frame. Repeat on the other side.

Finally secure the Velcro flaps on the bottom of the net around the middle base poles.

 

Caution: Do not stand in front of the pole when bending. The pole may spring back and cause injury. The help of a second person is recommended.

Warning: Use adult supervision and follow instructions when using and setting up the net. Frequent use and/or abuse will eventually strain the net and can cause breakage.